激光刻痕对取向电工钢磁畴和铁损的影响

为了研究激光刻痕工艺参数对取向电工钢表面的磁畴形貌、刻痕线宽度和铁损的影响规律，开展了激光刻痕工艺试验。结果表明，激光刻痕后取向电工钢表面的磁畴宽度明显细化，且随着输入电流的增加，磁畴宽度先减小后增大；刻痕线宽度随着输入电流的增加而增大。对于本次试验样品，通过对比分析，确定最佳激光刻痕工艺参数为电流为 12 A，激光频率为 5 kHz，刻痕速度为 800 mm/s，该参数下铁损改善率可达 11.81%。     

吐哈盆地葡北地区“两宽一高”地震勘探技术及应用效果

吐哈盆地台北凹陷圈闭落实的准确度和储层分布预测的精度一直是制约该区油气发现的关键因素。通过可控震源“两宽一高”地震采集、OVT域时间偏移、地质导向深度偏移初始模型建立及各向异性深度偏移迭代处理，在地震资料的信噪比、频带宽度和分辨率等方面明显提高的基础上，以高精度层序地层学为指导，基于高分辨率地震资料与钻井、测井资料的综合分析，识别出侏罗系6个三级层序，在三级层序格架内将研究区七克台组底部和三间房组顶部砂体识别为两个连续上升半旋回四级层序；通过构造几何属性分析及精细构造分析，揭示了本区“四带、两凹”的构造格局及形成机制；以宽频带多种反演技术为手段，对含油气层段的七克台组和三间房组砂体分布进行了预测；在综合构造分析、储层分析和油藏成藏规律分析的基础上，提出本区油气沿构造带脊线聚集，断裂系统是油气运移的优势路径，七克台组、三间房组储层在葡北构造带发育，向玉果构造带和胜北次凹减薄尖灭，葡北构造带与玉果构造带结合部位的，具有鼻状构造背景的岩性圈闭是获得油气突破的有利地区。     

Chemoenzymatic Synthesis of Fragrance Compounds from Stearic Acid

Fatty acids are versatile precursors for fuels, fine chemicals, polymers, perfumes, etc. The properties and applications of fatty acid derivatives depend on chain length and on functional groups and their positions. To tailor fatty acids for desired properties, an engineered P450 monooxygenase has been employed here for enhanced selective hydroxylation of fatty acids. After oxidation of the hydroxy groups to the corresponding ketones, Baeyer–Villiger oxidation could be applied to introduce an oxygen atom into the hydrocarbon chains to form esters, which were finally hydrolyzed to afford either hydroxylated fatty acids or dicarboxylic fatty acids. Using this strategy, we have demonstrated that the high-value-added flavors exaltolide and silvanone supra can be synthesized from stearic acid through a hydroxylation/carbonylation/esterification/hydrolysis/lactonization reaction sequence with isolated yields of about 36 % (for ω−1 hydroxylated stearic acid; 100, 60, 80, 75 % yields for the individual reactions, respectively) or 24 % (for ω−2 hydroxylated stearic acid). Ultimately, we obtained 7.91 mg of exaltolide and 13.71 mg of silvanone supra from 284.48 mg stearic acid.     

计及Spark和属性权重的售电套餐推荐方法

针对电力市场用户群庞大，交易过程中售电套餐选择困难的问题，在Spark环境下设计了一种售电套餐推荐方法，同时也解决了售电套餐推荐过程中在大数据环境下的可扩展性及实时性问题。首先，计算出每个套餐属性的权重值，从而计算得到售电套餐综合相似度。然后，计及用户和套餐两方面提出一种售电套餐推荐方法，实现售电套餐的精准推荐。实验表明，提出的推荐方法能够明显提高推荐的准确度，并且在分布式环境下具有良好的推荐效率和可扩展性。     

Influence of lanthanum on enhancement of mechanical and electrical properties of Cu-Al_2O_3 composites

Two kinds of Cu-Al_2O_3 composites(with and without La) were prepared via mechanical alloying-spark plasma sintering(MA-SPS) method. Microstructure, mechanical properties and electrical resistivity were investigated systematically using metallography, scanning electron microscopy, transmission electron microscopy, mechanical and electrical properties testing. The results indicate that an appropriate amount of La can homogenize the distribution of Al_2O_3. As such, yield strength, ultimate tensile strength and elongation of Cu-Al_2O_3-La are greatly increased. Some semi-coherent interface between Cu and Al_2O_3 is found, which means a low interface energy. The grain shape of Cu changes to irregular band with the addition of La. This change results in a density decrease of grain boundary and reduces electrical resistance. Lanthanum may exist in the form of La_2O_3.     

羊场湾煤矿软岩底板炉渣混凝土加固技术

为提高软岩底板强度而供无轨胶轮车等大型车辆行驶，结合羊场湾煤矿16206机巷软岩底板地质条件，研究了炉渣混凝土底板加固技术，确定了合理的配比方案，并对机巷现场进行混凝土地坪铺设应用。研究与应用结果表明：炉渣混凝土底板强度可满足大型车辆连续运输所需，极大地提高了底板承载能力，防止底鼓，为长距离巷道实现连续运输提供了基础保障。     

贾燕1,赵永涛2,张红松2

为确定ZrO2/莫来石热障涂层的单层最佳厚度,采用有限元技术研究单层厚度对ZrO2/莫来石热障涂层热冲击应力的影响。结果表明,莫来石层厚度为0.25mm时,涂层表面及ZrO2/莫来石界面处具有最大热应力,而其它莫来石层厚度时涂层内部热应力则受莫来石层厚度影响不明显。当ZrO2层厚度为0.3mm时,ZrO2/莫来石涂层中的热应力在整个横向距离范围内保持稳定,而其它情况下涂层中的热应力则与ZrO2层厚度成正比。涂层表面处的径向热应力大于ZrO2/莫来石界面处的对应值。